姜周华教授所发表论文摘录：
1. 姜周华, 姜兴渭. 电渣重熔系统渣池发热分布的数学模型. 东北大学学报(自然科学版), 1988, 9(1): 63-69
2. 姜周华, 姜兴渭, 梁连科, 等. 电渣重熔过程传热特性的实验研究. 东北大学学报(自然科学版), 1988, 9(2): 188-193
3. 杨怀, 姜周华, 解希元, 等. 等离子电弧炉回收Ni-Al合金细粉工艺的研究. 东北大学学报(自然科学版), 1989, 10(1): 34-38
4. 姜周华, 姜兴渭. 电渣重熔过程渣面以上辐射传热的理论计算. 东北大学学报(自然科学版), 1991, 12(2): 188-193
5. 姜周华, 杜钢, P. Granati. Na-βAl2O3基电化学探头测定铁液中的硫含量. 东北大学学报(自然科学版), 1991, 12(3): 241-246
6. 姜周华, 李光强, 张颖, 等. Caβ″Al2O3的制备、性质及在氧传感器中的应用. 东北大学学报(自然科学版), 1991, 12(5): 59-63
7. 姜周华, 张颖, 刘喜海, 等. 电渣重熔Mn18Cr18N钢锭温度场的数学模型. 东北大学学报(自然科学版). 1997, 18(s): 132
8. 姜周华, 肖玉光, 刘喜海, 等.电渣离心铸造齿轮毛坯凝固数学模型. 东北大学学报, 1998, 19(s1): 153
9. 王书奎, 姜周华, 刘喜海, 等. 电渣重熔钢锭热应力状态的数值模拟. 东北大学学报, 1998, 19(s1): 156
10. Z. H. Jiang, Y. He, X. L. Jiang, et al. Thermal-conductivity measurements for filling materials for sliding gates and their effects on free-tapping performance of steel ladle. ACTA Metallurgica Sinica, 1999, 12(5): 1125-1129
11. 姜周华, 武拥军, 梁连科, 等. 齿轮钢液相线温度预报技术. 东北大学学报(自然科学版), 2000, 21(1): 76-79
12. Jiang Zhouhua, Li Yang, Liang Lianke, et al. Deoxidation Behavior of Ba bearing Alloys in Molten Steel. The 2nd Korea-China Joint Symposium on Advanced Steel Technology. PohangKorea, 2001, July: 44-51
13. 姜周华, 李阳, 梁连科, 等. 钡系合金脱氧行为的实验研究. 第十届全国钢质量与非金属夹杂物控制学术会议论文集, 中国 贵阳, 2001, 10月: 46-53
14. 姜周华, 张贺艳, 战东平, 王文忠. LF炉冶炼超低硫钢的工艺条件. 东北大学学报(自然科学版), 2002, 23(10): 952-955
15. LI Yang, JIANG Zhou-hua, Liang Lianke. Production and Deoxidation Behavior in Molten Steel of Ba bearing Alloys. Ferroalloys, 2003(s): 37-43
16. LI Yang, JIANG Zhou-hua, JIANG Mao-fa, WANG Jun-wen, GU Wen-bing. Deoxidation Behavior of Alloys Bearing Barium in Molten Steel. Journal of Iron and Steel Research, 2003, 10(4): 13-17
17. Zhan Dongping, Jiang Zhouhua, Wang Wenzhong, et al. Investigation on slag modifier for refining of ultra-low sulfur steel. 2003 Asia Steel International Conference, Jamshedpur,India2003, April: 2.b.3.1-2.b.3.4
18. Jiang Zhouhua, Gong Wei, Wang Wenzhong, et al. A methematical model of the decarburization in the UHP electric arc furnace with hot metal charging. 2003 Asia Steel International Conference,Jamshedpur,India2003, April: 2.d.3.1-2.d.3.6
19. Li yang, Jiang Zhouhua, Jiang Maofa, et al. Deoxidation of cold heading steel by ba-bearing alloy. 2003 Asia Steel International Conference,Jamshedpur,India2003, April: 2.g.6.1-2.g.6.6
20. 姜周华, 李阳, 袁伟霞. 精炼渣成分对钢中夹杂物影响的实验研究. 2003中国钢铁年会论文集(第3卷), 北京 中国, 2003年10月: 222-225
21. JIANG Zhou-hua, CHEN Zhao-ping, ZOU De-ling, et al. Calculation and Measurements of Nitrogen Contents in Austenitic Stainless Steel Melts by Bubbling Nitrogen Gas. Proceedings of second International Conference on Advanced Structural Steels. Shanghai,China, April 14-16, 2004: 852-856
22. Jiang Z H, Chen Z P, Huang Z Z, Zou D L, Liang. L K. The nitrogen solubility in molten stainless steel. Steel Research International, 2005, 76(10): 730
23. 姜周华, 唐东, 顾文斌, 刘晓，王军文. LF运行电抗模型及供电优化. 中国特殊钢年会2005论文集, 中国金属学会, 北京, 2005年5月: 75-77
24. 姜周华, 李阳, 刘杨. 钡处理钢的微观组织和机械性能研究. 2005中国钢铁年会论文集(第3卷), 北京 中国, 2005年10月: 707-711
25. Jiang Maofa, Jiang Zhouhua. Special theme issue: Recent Chinese developments in ferrous metallurgy. Developments in Chemical Engineering and Mineral Processing, 2006, 14(3/4): 341-342.
26. Yang Li, Zhou-Hua Jiang, Yang Liu. Effect of refining slag composition on inclusions in molten steel treated by barium-bearing alloy. Developments in Chemical Engineering and Mineral Processing, 2006, 14(3/4): 439-448
27. Dong-ping Zhan, Zhou-hua Jiang, Wen-zhong Wang. Development of deep desulfurization technology with premelted slag during RH-KTB refining. Developments in chemical engineering & mineral, 2006, 14(3/4): 375-384
28. Jiang Zhouhua, Li Huabing, Shen Minghui. Manufacture of nickel free high nitrogen austenitic stainless steels. Proceedings of International Conference on High Nitrogen Steels 2006, Jiuzhaigou,Sichuan,China. August 29 to 31, 2006: 372-380
29. 李双江，李阳，姜周华，梁连科. 409L不锈钢镁铝尖晶石夹杂物的生成研究.东北大学学报（自然科学版）.2010年6月：848-851
30. 庄迎，姜周华，李阳. 精炼渣碱度对304不锈钢中夹杂物的影响. 东北大学学报（自然科学版）. 2010， 10月：1445-1448
31. 董艳伍,姜周华,肖志新,李正邦. 电渣重熔用渣料烘烤过程的失重现象[J]. 东北大学学报(自然科学版),2010年8月:1141-1144.
32. Yang Li, Shuangjiang Li, Ying Zhuang, Zhouhua Jiang. Preparation of Ultra-fine MgO·Al2O3 spinel power and its Metallurgy behavior in low carbon steel. Materials science Forum Vols.675-677(2011)pp 291-294.
33. DONG Yan-wu,JIANG Zhou-hua,XIAO Zhi-xin,LI Zheng-bang.Calcination of Slags for Electroslag Remelting[J]. Journal of Iron and Steel Research(International), Volume 17, Issue 8, 2010,08:1-5.
34. Huishu Zhang,Dongping Zhan,Songlian Bai and Zhouhua Jiang. Corrosion behavior of Al-Si-Cr-Cu Bearing low carbon steel in a cyclic drywet laboratory test.Advanced Materials Research Vols 79-82(2009) pp 1017-1020
35. Wei Wang, Wei Yan, Ke Yang, Yiyin Shan, and Zhouhua Jiang. Temperature Dependence of Tensile Behaviors of Nitrogen-Alloyed Austenitic Stainless Steels . Journal of Materials Engineering and Performance.JMEPEG (2010) 19:1214–1219.
36. Zhouhua Jiang,Zurui Zhang,Huabing Li and Qifeng Ma, Microstructural Evolution and Mechanical properties of Aging Annealed High Nitrogen Austenitic Stainless Steels. International Journal of Minerals, Metallurgy and Materials, Volume 17, Number 6, December 2010, Page 729
37. Zurui Zhang ,Huabing Li,Zhouhua Jiang and Zhen Li. Microstructural and Mechanical Aspects of High Nitrogen Steels at Cryogenic Temperature.Advanced Materials Research Vols.97-101(2010)pp 733-736.
38. Wanming Li, Huabing Li and Zhouhua Jiang. Research on the thermal plasticity of the 18Mn-18Cr-0.77N-2Mo high nitrogen austenitic stainless steel.Supplement Proceedings.General Paper Slections TMS(The Minerals,Matals & Materals Society), Volume3:2010.
39. 李阳,李伟坚,姜周华,李双江.复合脱氧剂对430不锈钢脱氧行为的影响[J].北京科技大学学报,2009年12月,S1:100-103.
40. Yang Li,Shuangjiang Li,Ying Zhuang Weijian Li and Zhouhua Jiang. Preparation of ultra-fine MgO•Al2O3 spinel powder and its metallurgy behavior in medium carbon steel. Materials science Forum Vols.675-677(2011) pp 291-294.
41. Ma J H, Zhan D P, Jiang Z H, et al. Effect of Ti, Al and Mg Addition on the Impact Toughness of Heat Affected Zone in Low Carbon Steel[J]. Advanced Materials Research, 2009/Aug, (Volumes 79 - 82): 143-146.
42. Dong Y W, Jiang Z H, Liang L K, et al. Behavior of Hydrogen during Electroslag Remelting Process[C]//Materials Science Forum. 2011, (Volumes 675 - 677): 843-846
43. Geng X, Jiang Z H, Liu F B, et al. Manufacturing of Heavy Plates with Excellent Mechanical Properties by a 40t ESR Furnace for Slab Products[J]. Advanced Materials Research, 2009, (Volumes 79 - 82): 1747-1750.
44. Geng X, Jiang Z. Quality of Slab Ingots and Heavy Plates Produced by a 40 t ESR Furnace[J]. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 USA.[np]. 14-18, Feb, 2010..
45. Zhang Z R, Li H B, Jiang Z H, et al. Influences of Aging Precipitation on Corrosion Resistance of 18Cr-18Mn-2Mo-0.77 N HNS[J]. Advanced Materials Research, 2009, (Volumes 79-82): 1013-1016.
46. Li H B, Jiang Z H, Li Z, et al. Pitting Susceptibility and Semiconducting Properties of Passive Films of 18Cr-18Mn-2Mo-0.9 N High Nitrogen Austenitic Stainless Steel[J]. Advanced Materials Research, 2009, (Volumes 79 - 82): 993-996.
47. Ma J H, Zhan D P, Jiang Z H, et al. Effect of Ti, Al and Mg Addition on the Impact Toughness of Heat Affected Zone in Low Carbon Steel[J]. Advanced Materials Research, 2009, 79: 143-146.
48. Jiang Z H, Li S J, Li Y. Thermodynamic Calculation of Inclusion Formation in Mg-Al-Si-O System of 430 Stainless Steel Melts[J]. Journal of Iron and Steel Research, International, 2011, 18(2): 14-17.
49. Z.H. Jiang, Y.W. Dong, L.K. Liang, Z.B. Li. “Hydrogen pick-up during electroslag remelting process”, J. Iron Steel Res. Int., 2011, 18(4): 19-23.
50. Hao Feng Lu, Feng Li, Gang Liu, Zhi-Gang Chen, Da-Wei Wang, Hai-Tao Fang, Gao Qing Lu, Zhou Hua Jiang, Hui-Ming Cheng. Amorphous TiO2 nanotube arrays for low-temperature oxygen sensors.Nanotechnology. 2008 /June,19(40): 405504-405511
评论